Manipis na pader na Injection Molding Machine

项目 ITEM		单位YUNIT	SZ—1300A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	35	40	45
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	24	21	18.7
理论注射容积	THEORETICAL SHOT VOLUME	CM³	173	226	286
注射质量(PS料)	SHOT WEIGHT(PS)	g	158	206	260
注射压力	INJECTION PRESSURE	Mpa	235	180	142
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	110	143	181
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	13.8	19.7	27.1
螺杆驱动扭矩	TORQUE NG SCREW	Nm	740
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	250
洼射行程	INJECTION STROKE	mm	180
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	1300
移模行程	MAX.OPENING STROKE	mm	400
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	420×420
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	160-440
模板最大开距	MAX.DAYLIGHT	mm	840
液压顶出力	PWERSA NG EJECTOR	KN	31.4
液压顶出行程	EJECTOR STROKE	mm	100
液压顶出杆总数	DAMI NG EJECTOR		5
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	13
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	9.2
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	4.7×1.25×1.85
机器净重	NET WEIGHT	t	4.3
油箱容积	KAPASIDAD NG OIL TANK	L	360
国际公认型号	INTERNATIONAL NA DESIGNATION		1300—410

MABILIS NA LINK