Mataas na De-kalidad na Plastic Crate Injection Molding Machine

项目 ITEM		单位YUNIT	SZ—3800A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	65	70	75
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	22.6	21	19.6
理论注射容积	THEORETICAL SHOT VOLUME	CM³	1061	1231	1413
注射质量(PS料)	SHOT WEIGHT(PS)	g	966	1120	1286
注射压力	INJECTION PRESSURE	Mpa	203	175	152
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	308	357	410
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	50.6	60.5	71.5
螺杆驱动扭矩	TORQUE NG SCREW	Nm	2860
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	150
洼射行程	INJECTION STROKE	mm	320
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	3800
移模行程	MAX.OPENING STROKE	mm	680
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	680×680
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	250-710
模板最大开距	MAX.DAYLIGHT	mm	1390
液压顶出力	PWERSA NG EJECTOR	KN	90.7
液压顶出行程	EJECTOR STROKE	mm	170
液压顶出杆总数	DAMI NG EJECTOR		13
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	37
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	25
加热区段	SONA NG PAG-INIT		5
机器外形(LxWxH)	SIZE	m	6.8×2.0×2.3
机器净重	NET WEIGHT	t	15
油箱容积	KAPASIDAD NG OIL TANK	L	820
国际公认型号	INTERNATIONAL NA DESIGNATION		3800—2150

MABILIS NA LINK