Murang China Maaasahang Plastic Chair Injection Molding Machine

项目 ITEM		单位YUNIT	SZ—10000A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	100	110	120	130
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	24.2	22	20.2	18.6
理论注射容积	THEORETICAL SHOT VOLUME	CM³	4083	4941	5880	6901
注射质量(PS料)	SHOT WEIGHT(PS)	g	3715	4496	5350	6280
注射压力	INJECTION PRESSURE	Mpa	206	171	143	122
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	695	841	1001	1175
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	96	116	130	148
螺杆驱动扭矩	TORQUE NG SCREW	Nm	8690
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	110
洼射行程	INJECTION STROKE	mm	520
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	10000
移模行程	MAX.OPENING STROKE	mm	1160
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	1110×1110
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	450-1200
模板最大开距	MAX.DAYLIGHT	mm	2360
液压顶出力	PWERSA NG EJECTOR	KN	245
液压顶出行程	EJECTOR STROKE	mm	350
液压顶出杆总数	DAMI NG EJECTOR		21
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	90
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	68.45
加热区段	SONA NG PAG-INIT		6
机器外形(LxWxH)	SIZE	m	12.38×2.8×3.5
机器净重	NET WEIGHT	t	60
油箱容积	KAPASIDAD NG OIL TANK	L	1700
国际公认型号	INTERNATIONAL NA DESIGNATION		10000—8410

MABILIS NA LINK