Pipe Fitting Injection Molding Machine

项目 ITEM		单位YUNIT	SZ—2000A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	50	55	60
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	23.1	21	19.3
理论注射容积	THEORETICAL SHOT VOLUME	CM³	491	594	707
注射质量(PS料)	SHOT WEIGHT(PS)	g	447	540	643
注射压力	INJECTION PRESSURE	Mpa	215	178	149
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	145	175	208
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	22.5	28.7	35.4
螺杆驱动扭矩	TORQUE NG SCREW	Nm	1510
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	170
洼射行程	INJECTION STROKE	mm	250
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	2000
移模行程	MAX.OPENING STROKE	mm	500
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	505×505
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	190-530
模板最大开距	MAX.DAYLIGHT	mm	1030
液压顶出力	PWERSA NG EJECTOR	KN	53.1
液压顶出行程	EJECTOR STROKE	mm	125
液压顶出杆总数	DAMI NG EJECTOR		5
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	18.5
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	16.6
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	5.9×1.5×2
机器净重	NET WEIGHT	t	6.8
油箱容积	KAPASIDAD NG OIL TANK	L	420
国际公认型号	INTERNATIONAL NA DESIGNATION		2000—1060

MABILIS NA LINK