SZ—1700A injection molding machine

项目 ITEM		单位YUNIT	SZ—1700A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	45	50	55
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	23.3	21	19.1
理论注射容积	THEORETICAL SHOT VOLUME	CM³	358	442	534
注射质量(PS料)	SHOT WEIGHT(PS)	g	326	402	486
注射压力	INJECTION PRESSURE	Mpa	219	178	147
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	142	175	212
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	20.1	26.5	34.2
螺杆驱动扭矩	TORQUE NG SCREW	Nm	1250
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	200
洼射行程	INJECTION STROKE	mm	225
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	1700
移模行程	MAX.OPENING STROKE	mm	460
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	480×480
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	180-500
模板最大开距	MAX.DAYLIGHT	mm	960
液压顶出力	PWERSA NG EJECTOR	KN	45.2
液压顶出行程	EJECTOR STROKE	mm	115
液压顶出杆总数	DAMI NG EJECTOR		5
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	15
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	13.6
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	5.3×1.35×1.9
机器净重	NET WEIGHT	t	5.6
油箱容积	KAPASIDAD NG OIL TANK	L	420
国际公认型号	INTERNATIONAL NA DESIGNATION		1700—785

MABILIS NA LINK