SZ—2700A injection molding machine

项目 ITEM		单位YUNIT	SZ—2700A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	55	60	65
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	21.8	20	18.4
理论注射容积	THEORETICAL SHOT VOLUME	CM³	598	712	836
注射质量(PS料)	SHOT WEIGHT(PS)	g	538	641	752
注射压力	INJECTION PRESSURE	Mpa	200	168	143
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	240	285	334
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	38	45	52
螺杆驱动扭矩	TORQUE NG SCREW	Nm	2530
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	190
洼射行程	INJECTION STROKE	mm	250
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	2700
移模行程	MAX.OPENING STROKE	mm	550
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	570×570
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	220-600
模板最大开距	MAX.DAYLIGHT	mm	1150
液压顶出力	PWERSA NG EJECTOR	KN	65
液压顶出行程	EJECTOR STROKE	mm	150
液压顶出杆总数	DAMI NG EJECTOR		9
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	30
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	18.5
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	6.3×1.6×2.15
机器净重	NET WEIGHT	t	9
油箱容积	KAPASIDAD NG OIL TANK	L	560
国际公认型号	INTERNATIONAL NA DESIGNATION		2700—1200

MABILIS NA LINK