SZ—700A Injection Molding Machine

项目 ITEM		单位YUNIT	SZ—700A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	32	35	38
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	20	18.5	17.8
理论注射容积	THEORETICAL SHOT VOLUME	CM³	112.5	135	158.6
注射质量(PS料)	SHOT WEIGHT(PS)	g	101	121	142
注射压力	INJECTION PRESSURE	Mpa	203	170	114
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	62	72	84
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	11	12	14
螺杆驱动扭矩	TORQUE NG SCREW	Nm	390
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	200
洼射行程	INJECTION STROKE	mm	140
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	700
移模行程	MAX.OPENING STROKE	mm	290
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	320×320
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	100-320
模板最大开距	MAX.DAYLIGHT	mm	610
液压顶出力	PWERSA NG EJECTOR	KN	27
液压顶出行程	EJECTOR STROKE	mm	60
液压顶出杆总数	DAMI NG EJECTOR		1
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	9
油泵最高压力	PRESSURE NG PUMP	Mpa	14
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	6.2
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	3.6×1.2×1.6
机器净重	NET WEIGHT	t	2.7
油箱容积	KAPASIDAD NG OIL TANK	L	250
国际公认型号	INTERNATIONAL NA DESIGNATION		700—210

MABILIS NA LINK