SZ—950A injection molding machine

项目 ITEM		单位YUNIT	SZ—950A
注射装置 INJECTION UNIT
螺杆直径	DIAMETER NG SCREW	mm	30	35	40
螺杆长径比	RATIO NG TAPI NG SCREW	L/D	24.5	21	18.4
理论注射容积	THEORETICAL SHOT VOLUME	CM³	113	154	201
注射质量(PS料)	SHOT WEIGHT(PS)	g	103	140	183
注射压力	INJECTION PRESSURE	Mpa	249	183	140
理论注射速率(PS料)	TEORETIKAL INJECTION RATE(PS)	g/s	67.5	91.8	120
塑化能力(PS料)	KAPASIDAD SA PLASTIK	g/s	8.3	12.5	18
螺杆驱动扭矩	TORQUE NG SCREW	Nm	510
螺杆最高转速	MAX.SCREW ROTATE BILIS	r/min	260
洼射行程	INJECTION STROKE	mm	160
合模装置 CLAMPING UNIT
合模力	MAX.CLAMPING FORCE K	KN	950
移模行程	MAX.OPENING STROKE	mm	340
拉杆有效间距(VxH)	SPACE SA PAGITAN NG TIE BARS	mm	360×360
允许模厚(MIN-MAX)	TAAS NG MOLD	mm	135-380
模板最大开距	MAX.DAYLIGHT	mm	720
液压顶出力	PWERSA NG EJECTOR	KN	25.4
液压顶出行程	EJECTOR STROKE	mm	85
液压顶出杆总数	DAMI NG EJECTOR		5
其它 IBA
油泵电动机功率	PUMP MOTOR POWER	KW	11
油泵最高压力	PRESSURE NG PUMP	Mpa	16
料简加热功率	KAPANGYARIHAN NG PAG-INIT	KW	7.3
加热区段	SONA NG PAG-INIT		4
机器外形(LxWxH)	SIZE	m	4.25×1.2×1.8
机器净重	NET WEIGHT	t	3.2
油箱容积	KAPASIDAD NG OIL TANK	L	260
国际公认型号	INTERNATIONAL NA DESIGNATION		950—280

MABILIS NA LINK